Notify me when this product is back in stock
You will receive an email when the product is back in stock
JG Speedfit PSE3210WP Female Coupler Tap Connector 10 x 12.7mm - Pack of 2
JG Speedfit PSE3210WP Female Coupler Tap Connector 10 x 12.7mm - Pack of 2
Product code: 117370
Product added for Click & Collect
Product has not been added for Click & Collect
Click & Collect
Nearest Store
More Stores
Quantity:
1
£9.50
Stores with both stock and Click & Collect near .
FREE Click & Collect in as little as 15 minutes from over 230 stores
JG speedfit female coupler tap connector push-fit fitting for the connection of plastic or copper pipes to a male thread fixture or appliance. The female coupler is ideal for the connection of taps and toilets. Simply push the push-fit fitting fully onto the pipe and hand turn onto the thread. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG speedfit female coupler tap connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools.
Read more
Read less
Saved to Project List
JG Speedfit PSE3210WP Female Coupler Tap Connector 10 x 12.7mm - Pack of 2
added to "My Project List".
You are not logged in to save your list permanently. Until you log in, your list will be saved temporarily and can only be accessed from the device you are using now.
Standard Delivery - From £5
Click & Collect from store in as little as 15 minutes - FREE
Standard Delivery - From £5
Click & Collect from store in as little as 15 minutes - FREE
Product details
- Diameter: 29.5 mm
- Length: 39.1 mm
- Connection Type: Push-Fit
- Material: Plastic
- Maximum Pressure: 12 bar
- Colour: White
- Finish: Matte
- Years Guaranteed: 50
- Type: Connectors
- Pack Quantity: 2
- Manufacturer Model No: PSE3210WP
- Country Origin: UK
- Brand Name: JG Speedfit
Features & benefits
- Instant push-fit and hand-tighten connection
- Install and demount in seconds without tools
- Safe flame-free installation, with no hot works, glue or flux
- Grip & Seal collet with stainless steel teeth and main O-Ring seal
- Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
- Suitable for hot and cold water and central heating systems
- Cold Water: 12 bar, Central Heating: 3 bar, Hot Water: 6 bar
- Size: 10mm x 12.7mm/0.5inch
- 50 year warranty (T&Cs apply)